For those who do not know, a psaltery is an instrument that is somewhat a combination of a violin and a harp and is often played in the olden days. Now if one likes to play a string instrument that produces a somewhat unique sound, then he can actually play this instrument. This guide will help him be able to create his own handmade psalteries.
Now the first step in the process would be to make the frame. Now the frame is probably the most important part of the instrument because it is what holds the entire thing together. In order to make the frame, one has to cut two thin pieces of plywood for the sides and another thick piece of wood for the base.
Upon cutting up these three pieces, one must now use some glue to put them all together. Now he must make use of a wood glue that has the capacity to keep the wood pieces together. Now he must first apply the glue, stick the wood pieces, and then wait for a while until the glue dries.
After doing that, then one now has to create a covering for the back of the instrument. Now to create the back, one will be making a huge triangle the size of the frame. Now he just must make a triangle from some plywood and then attach it to the back of the frame.
After creating the back, he then has to create the front which is also known as the soundboard. Now the soundboard is the part of the instrument wherein the strings and pins can actually be found. Now to make this, one just has to cut out a thin plywood and model it after the back then stick it on the front.
Once he has created the entire thing, he must now cut out a small tuning hole in the middle of the creation and put some pins. Now in order to put the pins, he must drill some holes in the wood where he will stick the pins. To know where he should put the pins, he may actually search the internet for some instructions.
Once the pins are already in their place, the next thing to do would be to place the strings. If one does not know where to buy strings, he should try visiting a guitar or violin store. Once the strings have been acquired, one must use a pair of pliers to tie the strings around the pins.
Now once he has put the strings up, he then has to put the bridge. Now the bridge is actually very crucial because it is the part that will allow the psaltery to create a nice sound. Now the location of the bridge would be near the pins at the base of the instrument. Only after he has already attached everything that he can now just start plucking or strumming the strings. Now if he would want, he can actually create a bow for his psaltery but that can be done next time.
Now the first step in the process would be to make the frame. Now the frame is probably the most important part of the instrument because it is what holds the entire thing together. In order to make the frame, one has to cut two thin pieces of plywood for the sides and another thick piece of wood for the base.
Upon cutting up these three pieces, one must now use some glue to put them all together. Now he must make use of a wood glue that has the capacity to keep the wood pieces together. Now he must first apply the glue, stick the wood pieces, and then wait for a while until the glue dries.
After doing that, then one now has to create a covering for the back of the instrument. Now to create the back, one will be making a huge triangle the size of the frame. Now he just must make a triangle from some plywood and then attach it to the back of the frame.
After creating the back, he then has to create the front which is also known as the soundboard. Now the soundboard is the part of the instrument wherein the strings and pins can actually be found. Now to make this, one just has to cut out a thin plywood and model it after the back then stick it on the front.
Once he has created the entire thing, he must now cut out a small tuning hole in the middle of the creation and put some pins. Now in order to put the pins, he must drill some holes in the wood where he will stick the pins. To know where he should put the pins, he may actually search the internet for some instructions.
Once the pins are already in their place, the next thing to do would be to place the strings. If one does not know where to buy strings, he should try visiting a guitar or violin store. Once the strings have been acquired, one must use a pair of pliers to tie the strings around the pins.
Now once he has put the strings up, he then has to put the bridge. Now the bridge is actually very crucial because it is the part that will allow the psaltery to create a nice sound. Now the location of the bridge would be near the pins at the base of the instrument. Only after he has already attached everything that he can now just start plucking or strumming the strings. Now if he would want, he can actually create a bow for his psaltery but that can be done next time.
About the Author:
When you are looking for information about handmade psalteries, you can pay a visit to the web pages online here today. Details are available at http://www.davespsaltery.com now.
No comments:
Post a Comment